Okatmos EG 20
Description
Solvent-free, very low emission primer with high bond strength for the preparation of non-absorbent and absorbent substrates as well as over old, load bearing and waterprooof cut back adhesive residue (no bitumen-based cut back adhesive).
Sanitizing properties, so prevents smell and odours originating from microbial interactions between the floor covering and the substrate, especially in renovation projects. Can be diluted to a maximum of 1:3 with water on concrete substrates
Features
- Quick drying with no curing time. Once dry, install screed or smoothing compound
- Solvent free and very low emission
- For absorbent and non-absorbent substrates
- Promotes advanced Indoor-Air-Quality
- Downloads
- Specifications
Colour White Application Interior Application temperature
+ 17°C
Drying time*
approx. 0.5 - 3.0 h
for wooden substrates approx. 24 hFloor heating system
Suitable GISCODE D 1 according to TRGS 610
VOC EC 1 Plus according to GEV
Storage Store frost-free, can be stored for approx. 12 months
* At + 20 °C and 65% relative. Humidity. Higher temperatures and lower humidity shorten these values, while lower temperatures and higher humidity lengthen these values accordingly.
- Substrate Preparation
The substrate must be dry, clean and sound. Mechanically remove any oil based or loose products. The existing substrates be prepared as per AS1884 and meet the requirements for moisture control and Planeness, Smoothness and Abrupt Surface Deviation. Levelling compounds may be part of the solution to achieve these requirements. When in doubt contact Polyflor Technical Department on 1800 777 425.
- Processing
Apply Okatmos® EG 20 to the surface with a lambskin roller or brush. Avoid puddles and layer formation. On cement or calcium sulfate screeds, dilute Okatmos® EG 20 with water in a ratio of 1:1 to 1:3, depending on absorbency. Use Okatmos® EG 20 undiluted on dense, non-absorbent surfaces and wooden surfaces . The hygienising effect remains until diluted 1:1. Only start filling work after it is completely dry.
A system structure must be guaranteed.
- Coverage
- Undiluted 10-13m2 per kg
- 1.1 ratio 20m2 per kg (Standard Concrete Ratio)
- 1.2 ratio 30m2 per kg
- 1-3 ratio 40m2 per kg
- Packaging
- 10kg Plastic Container